AdvancedCleaner - Removal

The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.

1. Disable System Restore (Windows Me/XP).
2. Update the virus definitions.
3. Run a full system scan.
4. Delete any values added to the registry.

For specific details on each of these steps, read the following instructions.

1. To disable System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.

Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.

Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.

For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:

• How to disable or enable Windows Me System Restore
• How to turn off or turn on Windows XP System Restore

Note: When you are completely finished with the removal procedure and are satisfied that the threat has been removed, reenable System Restore by following the instructions in the aforementioned documents.

For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article: Antivirus Tools Cannot Clean Infected Files in the _Restore Folder (Article ID: Q263455).

2. To update the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:

• Running LiveUpdate, which is the easiest way to obtain virus definitions.
  
  If you use Norton AntiVirus 2006, Symantec AntiVirus Corporate Edition 10.0, or newer products, LiveUpdate definitions are updated daily. These products include newer technology.
  
  If you use Norton AntiVirus 2005, Symantec AntiVirus Corporate Edition 9.0, or earlier products, LiveUpdate definitions are updated weekly. The exception is major outbreaks, when definitions are updated more often.
  
  
• Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted daily. You should download the definitions from the Symantec Security Response Web site and manually install them.

The latest Intelligent Updater virus definitions can be obtained here: Intelligent Updater virus definitions. For detailed instructions read the document: How to update virus definition files using the Intelligent Updater.

3. To run a full system scan 

1. Start your Symantec antivirus program and make sure that it is configured to scan all the files.
   
   For Norton AntiVirus consumer products: Read the document: How to configure Norton AntiVirus to scan all files.
   
   For Symantec AntiVirus Enterprise products: Read the document: How to verify that a Symantec Corporate antivirus product is set to scan all files.
   
   
2. Run a full system scan.
3. If any files are detected, follow the instructions displayed by your antivirus program.

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode. Once you have restarted in Safe mode, run the scan again. 
After the files are deleted, restart the computer in Normal mode and proceed with the next section. 

Warning messages may be displayed when the computer is restarted, since the threat may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

4. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. For instructions refer to the document: How to make a backup of the Windows registry.

1. Click Start > Run.
2. Type regedit
3. Click OK.
   
   Note: If the registry editor fails to open the threat may have modified the registry to prevent access to the registry editor. Security Response has developed a tool to resolve this problem. Download and run this tool, and then continue with the removal.
   
4. Navigate to and delete the following registry entries:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\"AdvancedCleaner Free" = ""C:\Program Files\AdvancedCleaner Free\UADC.exe" /min"
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\"UADC_104911963" = ""C:\Program Files\AdvancedCleaner Free\UADCcw.exe" -c"
   
5. Navigate to and delete the following registry subkeys:
   
   HKEY_ALL_USERS\SofTware\AdvancedCleaner Free
   HKEY_LOCAL_MACHINE\SOFTWARE\AdvancedCleaner Free
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\UADC_is1
   HKEY_LOCAL_MACHINE\SOFTWARE\UADC_[EIGHT RANDOM CHARACTERS]

ADT.1765 - Removal

To remove this virus:

1. Run LiveUpdate to make ensure that you have the most recent virus definitions.
2. Start Norton AntiVirus (NAV), and run a full system scan, making sure that NAV is set to scan all files.
3. If any files are detected as infected by ADT.1765, click Repair.

AdShortcuts - Removal

The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.

1. Disable System Restore (Windows Me/XP).
2. Update the virus definitions.
3. Run a full system scan.

For specific details on each of these steps, read the following instructions.

1. To disable System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.

Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.

Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.

For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:

• How to disable or enable Windows Me System Restore
• How to turn off or turn on Windows XP System Restore

Note: When you are completely finished with the removal procedure and are satisfied that the threat has been removed, reenable System Restore by following the instructions in the aforementioned documents.

For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article: Antivirus Tools Cannot Clean Infected Files in the _Restore Folder (Article ID: Q263455).

2. To update the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:

• Running LiveUpdate, which is the easiest way to obtain virus definitions.
  
  If you use Norton AntiVirus 2006, Symantec AntiVirus Corporate Edition 10.0, or newer products, LiveUpdate definitions are updated daily. These products include newer technology.
  
  If you use Norton AntiVirus 2005, Symantec AntiVirus Corporate Edition 9.0, or earlier products, LiveUpdate definitions are updated weekly. The exception is major outbreaks, when definitions are updated more often.
  
  
• Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted daily. You should download the definitions from the Symantec Security Response Web site and manually install them.

The latest Intelligent Updater virus definitions can be obtained here: Intelligent Updater virus definitions. For detailed instructions read the document: How to update virus definition files using the Intelligent Updater.

3. To run a full system scan 

1. Start your Symantec antivirus program and make sure that it is configured to scan all the files.
   
   For Norton AntiVirus consumer products: Read the document: How to configure Norton AntiVirus to scan all files.
   
   For Symantec AntiVirus Enterprise products: Read the document: How to verify that a Symantec Corporate antivirus product is set to scan all files.
   
   
2. Run a full system scan.
3. If any files are detected, follow the instructions displayed by your antivirus program.

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode. Once you have restarted in Safe mode, run the scan again. 
After the files are deleted, restart the computer in Normal mode and proceed with the next section. 

Warning messages may be displayed when the computer is restarted, since the threat may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

AdsAlert - Removal

The following instructions pertain to all Symantec antivirus products that support security risk detection.

1. Update the definitions.
2. Run a full system scan.
3. Delete any values added to the registry.

For specific details on each of these steps, read the following instructions.

1. To update the definitions
To obtain the most recent definitions, start your Symantec program and run LiveUpdate.


2. To run the scan

1. Start your Symantec antivirus program, and then run a full system scan.
2. If any files are detected, and depending on which software version you are using, you may see one or more of the following options:
   
   Note: This applies only to versions of Norton AntiVirus that support security risk detection. If you are running a version of Symantec AntiVirus Corporate Edition that supports security risk detection, and security risk detection has been enabled, you will only see a message box that gives the results of the scan. If you have questions in this situation, contact your network administrator.
   
   • Exclude (Not recommended): If you click this button, it will set the risk so that it is no longer detectable. That is, the antivirus program will keep the security risk on your computer and will no longer detect it to remove from your computer.
     
   • Ignore or Skip: This option tells the scanner to ignore the risk for this scan only. It will be detected again the next time that you run a scan.
     
   • Cancel: This option is new to Norton Antivirus 2005. It is used when Norton Antivirus 2005 has determined that it cannot delete a security risk. This Cancel option tells the scanner to ignore the risk for this scan only, and thus, the risk will be detected again the next time that you run a scan.
     
     To actually delete the security risk:
     • Click its file name (under the Filename column).
     • In the Item Information box that displays, write down the full path and file name.
     • Then use Windows Explorer to locate and delete the file.
       
   • Delete: This option will attempt to delete the detected files. In some cases, the scanner will not be able to do this.
     • If you see a message, "Delete Failed" (or similar message), manually delete the file.
     • Click the file name of the risk that is under the Filename column.
     • In the Item Information box that displays, write down the full path and file name.
     • Then use Windows Explorer to locate and delete the file.
       

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode. Once you have restarted in Safe mode, run the scan again.

After the files are deleted, restart the computer in Normal mode and proceed with the next section. 

Warning messages may be displayed when the computer is restarted, since the risk may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

3. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. Read the document:How to make a backup of the Windows registry.

1. Click Start > Run.
2. Type regedit
   
   Then click OK.
   
   Note: If the registry editor fails to open the risk may have modified the registry to prevent access to the registry editor. Security Response has developed a tool to resolve this problem. Download and run this tool, and then continue with the removal.
   
3. Navigate to and delete the following subkeys:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\PcPrivacySoftware.com - AdsAlert_is1
   HKEY_ALL_USERS\Software\PCPrivacySoftware\AdsAlert
   HKEY_ALL_USERS\Software\PCPrivacySoftware\AdsAlert\Settings
   
4. Navigate to the subkey:
   
   HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
   
5. In the right pane, delete the value:
   
   "AdsAlert" = "%ProgramFiles%\PcPrivacySoftware\AdsAlert\AdsAlert.exe"
   
6. Exit the Registry Editor.

Adolph

Adolf is a virus that changes the infected program’s time and date stamp to the date and time of infection. The infection code contains the string:

Adolf Hitler

Recommendations

Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

• Use a firewall to block all incoming connections from the Internet to services that should not be publicly available. By default, you should deny all incoming connections and only allow services you explicitly want to offer to the outside world.
• Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
• Ensure that programs and users of the computer use the lowest level of privileges necessary to complete a task. When prompted for a root or UAC password, ensure that the program asking for administration-level access is a legitimate application.
• Disable AutoPlay to prevent the automatic launching of executable files on network and removable drives, and disconnect the drives when not required. If write access is not required, enable read-only mode if the option is available.
• Turn off file sharing if not needed. If file sharing is required, use ACLs and password protection to limit access. Disable anonymous access to shared folders. Grant access only to user accounts with strong passwords to folders that must be shared.
• Turn off and remove unnecessary services. By default, many operating systems install auxiliary services that are not critical. These services are avenues of attack. If they are removed, threats have less avenues of attack.
• If a threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
• Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services.
• Configure your email server to block or remove email that contains file attachments that are commonly used to spread threats, such as .vbs, .bat, .exe, .pif and .scr files.
• Isolate compromised computers quickly to prevent threats from spreading further. Perform a forensic analysis and restore the computers using trusted media.
• Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.
• If Bluetooth is not required for mobile devices, it should be turned off. If you require its use, ensure that the device's visibility is set to "Hidden" so that it cannot be scanned by other Bluetooth devices. If device pairing must be used, ensure that all devices are set to "Unauthorized", requiring authorization for each connection request. Do not accept applications that are unsigned or sent from unknown sources.
• For further information on the terms used in this document, please refer to the Security Response glossary.

Ada

Ada is a virus that specifically attacks the PC-cillin antivirus package. Ada deletes PC-cillin if it is found. When Ada is in memory, it may produce a slow clicking sound. Erroneous and random "disk full" messages may also appear. The infection code contains the string:

HATI-HATI !! ADA VIRUS DISINI !!.

Recommendations

Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

• Use a firewall to block all incoming connections from the Internet to services that should not be publicly available. By default, you should deny all incoming connections and only allow services you explicitly want to offer to the outside world.
• Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
• Ensure that programs and users of the computer use the lowest level of privileges necessary to complete a task. When prompted for a root or UAC password, ensure that the program asking for administration-level access is a legitimate application.
• Disable AutoPlay to prevent the automatic launching of executable files on network and removable drives, and disconnect the drives when not required. If write access is not required, enable read-only mode if the option is available.
• Turn off file sharing if not needed. If file sharing is required, use ACLs and password protection to limit access. Disable anonymous access to shared folders. Grant access only to user accounts with strong passwords to folders that must be shared.
• Turn off and remove unnecessary services. By default, many operating systems install auxiliary services that are not critical. These services are avenues of attack. If they are removed, threats have less avenues of attack.
• If a threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
• Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services.
• Configure your email server to block or remove email that contains file attachments that are commonly used to spread threats, such as .vbs, .bat, .exe, .pif and .scr files.
• Isolate compromised computers quickly to prevent threats from spreading further. Perform a forensic analysis and restore the computers using trusted media.
• Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.
• If Bluetooth is not required for mobile devices, it should be turned off. If you require its use, ensure that the device's visibility is set to "Hidden" so that it cannot be scanned by other Bluetooth devices. If device pairing must be used, ensure that all devices are set to "Unauthorized", requiring authorization for each connection request. Do not accept applications that are unsigned or sent from unknown sources.
• For further information on the terms used in this document, please refer to the Security Response glossary.

ACTS.Spaceflash - Removal

Systems Affected:

Windows 2000, Windows 95, Windows 98, Windows Me, Windows NT, Windows Server 2003, Windows XP

Delete the following line from the About Me page of the compromised MySpace.com account:

<EMBED src="http://i105.photobucket.com/albums/m225/[REMOVED]">BY [REMOVED]

ACTS.LFM.926 - Removal

NOTE: Virus definitions that can detect and remove ACTS.LFM.926 will be included in LiveUpdate on January 9, 2002. The instructions that follow assume that you are performing this removal on or after the date that these definitions have been released via LiveUpdate. In some cases, virus writeups are published before the actual definitions are released to the public.

If you suspect that the computer is infected with ACTS.LFM.926, but it has not been detected by Norton AntiVirus, submit the suspect file or files to Symantec using Scan and Deliver. See the document How to submit a file to Symantec Security Response using Scan and Deliver. If Symantec Security Response determines that the file is infected by a threat for which definitions have not yet been released, you may receive by return email a file which contains "Beta" definitions for the threat. Detach and execute the file to install the updated definitions, and then continue with the instructions in this document.

1. Run LiveUpdate to make sure that you have the most recent virus definitions.
2. Start Norton AntiVirus (NAV), and make sure that NAV is configured to scan all files. For instructions on how to do this, read the document How to configure Norton AntiVirus to scan all files.
3. Run a full system scan.
4. Delete all files that are detected as ACTS.LFM.926. Deleted files will have to be replaced from a clean backup or reinstalled.

Accept.3773

Accept.3773 is a virus that exists only to replicate.

Recommendations

Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

• Use a firewall to block all incoming connections from the Internet to services that should not be publicly available. By default, you should deny all incoming connections and only allow services you explicitly want to offer to the outside world.
• Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
• Ensure that programs and users of the computer use the lowest level of privileges necessary to complete a task. When prompted for a root or UAC password, ensure that the program asking for administration-level access is a legitimate application.
• Disable AutoPlay to prevent the automatic launching of executable files on network and removable drives, and disconnect the drives when not required. If write access is not required, enable read-only mode if the option is available.
• Turn off file sharing if not needed. If file sharing is required, use ACLs and password protection to limit access. Disable anonymous access to shared folders. Grant access only to user accounts with strong passwords to folders that must be shared.
• Turn off and remove unnecessary services. By default, many operating systems install auxiliary services that are not critical. These services are avenues of attack. If they are removed, threats have less avenues of attack.
• If a threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
• Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services.
• Configure your email server to block or remove email that contains file attachments that are commonly used to spread threats, such as .vbs, .bat, .exe, .pif and .scr files.
• Isolate compromised computers quickly to prevent threats from spreading further. Perform a forensic analysis and restore the computers using trusted media.
• Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.
• If Bluetooth is not required for mobile devices, it should be turned off. If you require its use, ensure that the device's visibility is set to "Hidden" so that it cannot be scanned by other Bluetooth devices. If device pairing must be used, ensure that all devices are set to "Unauthorized", requiring authorization for each connection request. Do not accept applications that are unsigned or sent from unknown sources.
• For further information on the terms used in this document, please refer to the Security Response glossary.

ABC

ABC is a virus that changes the infected program’s time and date stamp to the date and time of infection. It activates on the 13th day of any month. When double letters are typed, it triples the desired characters. For example, "book" is entered as "boook." The infection code contains the encrypted string:

ABC

Recommendations

Symantec Security Response encourages all users and administrators to adhere to the following basic security "best practices":

• Use a firewall to block all incoming connections from the Internet to services that should not be publicly available. By default, you should deny all incoming connections and only allow services you explicitly want to offer to the outside world.
• Enforce a password policy. Complex passwords make it difficult to crack password files on compromised computers. This helps to prevent or limit damage when a computer is compromised.
• Ensure that programs and users of the computer use the lowest level of privileges necessary to complete a task. When prompted for a root or UAC password, ensure that the program asking for administration-level access is a legitimate application.
• Disable AutoPlay to prevent the automatic launching of executable files on network and removable drives, and disconnect the drives when not required. If write access is not required, enable read-only mode if the option is available.
• Turn off file sharing if not needed. If file sharing is required, use ACLs and password protection to limit access. Disable anonymous access to shared folders. Grant access only to user accounts with strong passwords to folders that must be shared.
• Turn off and remove unnecessary services. By default, many operating systems install auxiliary services that are not critical. These services are avenues of attack. If they are removed, threats have less avenues of attack.
• If a threat exploits one or more network services, disable, or block access to, those services until a patch is applied.
• Always keep your patch levels up-to-date, especially on computers that host public services and are accessible through the firewall, such as HTTP, FTP, mail, and DNS services.
• Configure your email server to block or remove email that contains file attachments that are commonly used to spread threats, such as .vbs, .bat, .exe, .pif and .scr files.
• Isolate compromised computers quickly to prevent threats from spreading further. Perform a forensic analysis and restore the computers using trusted media.
• Train employees not to open attachments unless they are expecting them. Also, do not execute software that is downloaded from the Internet unless it has been scanned for viruses. Simply visiting a compromised Web site can cause infection if certain browser vulnerabilities are not patched.
• If Bluetooth is not required for mobile devices, it should be turned off. If you require its use, ensure that the device's visibility is set to "Hidden" so that it cannot be scanned by other Bluetooth devices. If device pairing must be used, ensure that all devices are set to "Unauthorized", requiring authorization for each connection request. Do not accept applications that are unsigned or sent from unknown sources.
• For further information on the terms used in this document, please refer to the Security Response glossary.